Information

1-800-283-5853 (US and Canada) • www.flukenetworks.com
22 23
MultiFiber
™
Pro
MultiFiber Pro is the rst MPO ber tester to support both Singlemode and Multimode MPO ber
certication. MultiFiber Pro takes the complexity out of testing MPO trunks for loss and polarity.
With an on-board MPO connector, it is the rst tester to automate the MPO ber-trunk testing process
without using a fan-out cord. The power meter/light source boasts industry-rst functions such as
automatic scanning of all twelve bers and display of test results in an easy-to-read bar graph. These
innovative features allow MultiFiber Pro kits to eliminate the complexity of testing MPO trunks, making it
90 percent faster than the traditional simplex ber test methods.
• Automatic scanning and testing of all bers in MPO connectors with “Scan All”
• Support for both Multimode and Singlemode MPO trunks
• Eliminates the need for fan-out cords when testing ber trunks
• Easy-to-interpret test results with minimal navigation
• User interface displays all 12 bers
• Automated 8, 10 and 12 ber measurements
• Troubleshoot MPO links and drill down to single ber test results
Model Description Gold 1YR Gold 3YR
MFTK1200 MultiFiber Pro Multimode Testing Kit GLD-MFTK GLD3-MFTK
MFTK-SM1310 MultiFiber Pro 1310 nm Singlemode Kit GLD-MFTK-SM GLD3-MFTK-SM
MFTK-SM1550 MultiFiber Pro 1550 nm Singlemode Kit GLD-MFTK-SM GLD3-MFTK-SM
MFTK-MM850-SM1310 MultiFiber Pro Multimode and 1310 nm Singlemode Kit GLD-MFTK-MMSM GLD3-MFTK-MMSM
MFTK-MM850-SM1550 MultiFiber Pro Multimode and 1550 nm Singlemode Kit GLD-MFTK-MMSM GLD3-MFTK-MMSM
MFTK-SM1310-SM1550 MultiFIber Pro 1310 and 1550 nm Singlemode Kit GLD-MFTK-1310-SM1550 GLD3-MFTK-1310-SM1550
OFPMI-MFP OptiFiber Pro and MultiFiber Pro Multimode Testing Kit GLD-OFPMI-MFP GLD3-OFPMI-MFP
OFPQI-MFP OptiFiber Pro Quad and MultiFiber Pro Multimode Testing Kit GLD-OFPQI-MFP GLD3-OFPQI-MFP
Accessories
Model Description Gold 1YR Gold 3YR
MFPOWERMETER MultiFiber Pro Optical Power Meter GLD-MF GLD3-MF
MFMULTIMODESOURCE MultiFiber Pro Multimode 850 LED light source GLD-MF GLD3-MF
MF1310source MultiFiber Pro SM 1310 nm laser light source GLD-MF-SMS GLD3-MF-SMS
MF1550source MultiFiber Pro SM 1550 nm laser light source GLD-MF-SMS GLD3-MF-SMS
FI-7000-MPO FiberInspector Pro with MPO and cleaning GLD-FI-7000-MPO GLD3-FI-7000-MPO
TRC-MPO-PP-B 1 m MM TRC, MPO/MPO, Pinned/Pinned, Type B polarity
TRC-MPO-UP-B 1 m MM TRC, MPO/MPO, Unpinned/Pinned, Type B polarity
TRC-MPO-UU-B 0.3 m MM TRC, MPO/MPO, Unpinned/Unpinned, Type B polarity
TRC-SM-MPOAPC-PP-A 1 m SM TRC, MPOAPC/MPOAPC, Pinned/Pinned, Type A polarity
TRC-SM-MPOAPC-UP-A 1 m SM TRC, MPOAPC/MPOAPC, Unpinned/Pinned, Type A polarity
TRC-SM-MPOAPC-UU-A 0.3 m SM TRC, MPOAPC/MPOAPC, Unpinned/Unpinned, Type A polarity
BKC-MPO-ULC 1 m Breakout Cord for MM MPO Unpinned LC connector
BKC-MPO-USC 1 m Breakout Cord for MM MPO Unpinned SC connector
SBKC-MPOAPCU-LCAPC 1 m Breakout Cord for SM MPOAPC Unpinned LCAPC Connector
SBKC-MPOAPCU-SCAPC 1 m Breakout Cord for SM MPOAPC Unpinned SCAPC Connector
ADP-MPO-A Type A polarity MPO adapter for SM APC
ADP-MPO-B Type B polarity MPO adapter
www.flukenetworks.com/fiber
FI-7000 FiberInspector
™
Pro
End-face contamination is a leading cause of ber failures. Dirt and contaminants cause insertion loss and
back-reection that inhibits optical transmission and causes havoc with transceivers. Fiber loss and OTDR
testing can expose this problem, but in many cases, dirty connections make ber testing time consuming
and inaccurate.
Since dirt can be an issue before, during, or after ber optic certication testing, and migrate from one
end-face to another upon mating, both sides of any connection must always be cleaned and inspected.
Further, mating contaminated connectors can cause permanent damage as microscopic debris is crushed
between end-faces in physical contact. Even factory terminated patch cords or pigtails must be inspected
as protective caps do not keep ber optic connector end-faces clean. Avoiding this common cause of
failure, starts with inspecting the ber optic connector end-face and eliminating any contamination
before insertion into a bulkhead or piece of equipment.
The FI-7000 FiberInspector Pro is a ber optic inspection scope that allows you to inspect and certify
end-faces in 2 seconds so you can get the job done the rst time. This ber optic inspection scope
provides automated PASS/FAIL certication taking the guess work out of ber inspection so anyone can
be a ber expert.
• Automated Pass/Fail certication of ber optic connector end-faces
• Graphical indication of problem areas due to contamination, pits, chips, and scratches
• Certify to industry standards—IEC 61300-3-35
• Eliminate human subjectivity from end-face measurements
Model Description Gold 1YR Gold 3YR
FI-7000 FiberInspector Pro GLD-FI-7000 GLD3-FI-7000
FI-7000-MPO FiberInspector Pro w/MPO and cleaning GLD-FI-7000-MPO GLD3-FI-7000-MPO
FI-1000-KIT
FI-1000 USB Fiber Inspection Video Probe with selective bulkhead and
video probe tips
GLD-FI GLD3-FI
FI-1000 FI-1000 USB Fiber Inspection Video Probe for Versiv platform GLD-FI GLD3-FI
Accessories
Model Description
FI1000-SCFC-TIP SC and FC bulkhead video probe tip
FI1000-LC-TIP LC bulkhead video probe tip
FI1000-ST-TIP ST bulkhead video probe tip
FI1000-MU-TIP MU bulkhead video probe tip
FI1000-E2KAPC-TIP E2000/APC bulkhead video probe tip
FI1000-SCAPC-TIP SC/APC bulkhead video probe tip
FI1000-E2K-TIP E2000 bulkhead video probe tip
FI1000-LCAPC-TIP LC/APC bulkhead video probe tip
FI1000-2.5-UTIP 2.5 mm universal video probe tip for patch cords
FI1000-1.25-UTIP 1.25 mm universal video probe tip for patch cords
FI1000-2.5APC-UTIP 2.5 mm APC universal video probe tip for patch cords
FI1000-MPO-UTIP MPO probe tip and translator knob for patch cords and bulkheads
FI1000-MPOAPC-UTIP MPO/APC probe tip and translator knob for patch cords and bulkheads
FI1000-1.25APC-TIP 1.25 mm APC universal video probe tip for patch cords
FI1000-MPOAPC-RT MPO/MTP APC replacement tip with no translator knob
FI1000-MPO-RT MPO/MTP replacement tip with no translator knob
Fiber Testing, Troubleshooting and Certification
Fiber Testing, Troubleshooting and Certification
To learn more visit: www.ukenetworks.com/-7000
To learn more visit: www.ukenetworks.com/multiberpro