Information

1-800-283-5853 (US and Canada) • www.flukenetworks.com
30 31
Fiber Optic Cleaning Kits
Contaminated end-faces are the #1 cause of ber link failure. Prevent this common problem with
Fluke Networks’ Fiber Optic Cleaning Kits and Components. These precision ber optic cleaning kits
and components allow effective removal of all contaminants from end-faces on both patch cords and
inside ports.
• Everything needed for precision cleaning of end-faces on both patch cords and inside ports
• Compact form factor options available. Specially formulated solvent dissolves contaminants,
neutralizes static charge and encapsulates particles for removal
• A range of wiper swabs enable decontamination of all styles of ber optic connections
• Use the convenient and rugged carrying case to store all of the cleaning components
Model Description
NFC-Kit-Case
Fiber Optic Cleaning Kit—includes cleaning cube with wipes, ten cards with sealed
cleaning zones, solvent pen, 2.5 mm port cleaning swabs and 1.25 mm port cleaning
swabs in a rugged carrying case
NFC-Kit-Box
Fiber Optic Cleaning Kit—includes cleaning cube with wipes, ve cards with sealed
cleaning zones, solvent pen and 2.5 mm port cleaning swabs
NFC-Cube Cleaning cube with wipes—cleans up to 500 end-faces
NFC-Cards-5pack 5 cards with 12 sealed cleaning zones each—perfect for troubleshooting
NFC-SolventPen Special solvent dispensed from pen (9 g)
NFC-Swabs-1.25mm LC and MU port cleaning swabs (25 count)
NFC-Swabs-2.5mm SC, ST, 2.5 mm port cleaning swabs (50 count)
NFC-Case Carrying case for cleaning accessories
NFC-IBC-1.25mm OneClick cleaners for 1.25 mm LC and MU connector and patch cord (5 qty)
NFC-IBC-2.5mm OneClick cleaners for 2.5 mm SC, ST, FC connector and patch cord (5 qty)
NFC-IBC-MPO OneClick cleaners for MPO/MTP connector (5 qty)
NFC-KIT-CASE-E
Enhanced Fiber Optic Cleaning Kit—includes (1) OneClick cleaner for 1.25 mm
connector, (1) OneClick cleaner for 2.5 mm connector, (1) OneClick cleaner for
MPO/MTP cleaner, a solvent pen, a cleaning cube and a softcase
FT525 FiberInspector Mini and Cleaning Kit
To learn more visit: www.flukenetworks.com/fibercleaning
www.flukenetworks.com/fiberinspection
Fiber Inspection and Cleaning
JackRapid
™
Termination Tool
The JackRapid Termination Tool is the industry’s most innovative and time-saving installation tool.
JackRapid allows you to terminate jacks eight times faster than traditional impact tools—with accuracy
that’s unmatched. The patented jack termination tool seats and terminates all wires simultaneously with
one squeeze of an ergonomic handle. The built-in blade cuts off the excess wire after it is seated in the
connector, eliminating the need for a secondary trim step. Simple, one-handed operation reduces hand
fatigue. With JackRapid, you’ll never punch into the palm of your hand or through drywall again.
• Cuts installation time—easy-to-use handle, seats and cuts all wires at once, saving you up to one
minute installation time per jack
• High-quality, consistent terminations—no more compromised connections and wasted jacks
• Simple, one-handed operation with an ergonomically designed handle reduces hand fatigue
Model Description
JR-LEV-1 JackRapid termination tool (for Leviton 41106, 41108, 5G108)
JR-LEV-1-H JackRapid replacement blade head (for Leviton 41106, 41108, 5G108)
JR-SYS-UNI-1 JackRapid termination tool (for Systimax MPS100E, C5, M1BH and Uniprise UNJ600/500/300)
JR-SYS-UNI-1-H JackRapid replacement blade head (for Systimax MPS100E, C5, M1BH and Uniprise UNJ600/500/300)
JR-LEV-2 JackRapid termination tool (for Leviton 61110, 5G110, 6110G)
JR-LEV-2-H JackRapid replacement blade head (for Leviton 61110, 5G110, 6110G)
JR-SYS-2 JackRapid termination tool (for Systimax MGS400, MGS500, MFP420, MFP520)
JR-SYS-2-H JackRapid replacement blade head (for Systimax MGS400, MGS500, MFP420, MFP520)
JR-ORT-2 JackRapid termination tool (for Ortronics TJ5E00, TJ600, TJ610)
JR-ORT-2-H JackRapid replacement blade head (for Ortronics TJ5E00, TJ600, TJ610)
JR-ADC-2 JR-ADC-2, JACKRAPID TERMINATION TOOL (FOR ADC C6a CopperTen® UTP RJ45 jack and the C6 TrueNet® KM8 UTP RJ45)
JR-ADC-2-H
JR-ADC-2-H, JACKRAPID REPLACEMENT BLADE HEAD (FOR ADC C6a CopperTen® UTP RJ45 jack and the C6 TrueNet® KM8
UTP RJ45)
JR-ERGOHANDLE JackRapid ergonomic handle
JR-PAN-2 JackRapid termination tool (for Panduit NK688M, NKP5E88M)
JR-PAN-2-H JackRapid replacement blade head (for Panduit NK688M, NKP5E88M)
6. Wires will be seated and cut for
a solid termination.
1. Strip cable jacket with a standard cable strip-
per or the built-in cable stripper.
2. Determine wiring scheme. Dress
all four pairs (eight wires).
3. Insert jack in JackRapid front rst with
IDC slots facing blades of JackRapid.
4. Ensure jack is completely and securely
inserted in jack holder bed with IDC
slots facing the blades.
5. Pull trigger completely and remove
excess wire prior to releasing trigger.
Test Tools and Kits
Get accurate terminations and clean, consistent cuts every time with the JackRapid Termination Tool.
To learn more visit: www.flukenetworks.com/jackrapid