Instructions

Chapter 6: Sync Projects with LinkWare
™
Live
About the Asset Management Service
93
If a project in the LinkWare Live recycle bin has never been
synced, and you create a project with the same name on the
DSX-600/602 then sync the project, LinkWare Live shows it as a
new, active project and gives it a unique ID.
About the Asset Management Service
LinkWare Live’s asset management service lets you see the
locations of your testers in the field. The owner of the LinkWare
Live account can enable or disable the service remotely for each
tester.
When this service is enabled on a tester, the asset management
icon ( ) shows on the tester’s home screen. When a technician
uses the tester to sign in to LinkWare Live, the tester’s location
shows on a map on LinkWare Live’s ASSETS page.
Note
You can enable or disable the asset management
service only with LinkWare Live. There is no
setting on the tester that enables or disables this
service.
Change the Network Settings
It is not usually necessary to change the wired or Wi-Fi network
settings before you try to make a connection. But for example if
you must use static addressing, you can get to the settings on the
NETWORK screen.
To get to the network settings
On the home screen, tap TOOLS, then tap Network, then tap the
Wired or Wi-Fi panel.
To test the settings
Tap CONNECT on the WI-FI PORT or WIRED PORT screen.