Instructions

DSX-600 Series CableAnalyzer
Users Manual
100
Verify Operation
The tester does a self test when you turn it on. If the tester shows
an error or does not turn on, refer to “If the Tester Does Not
Operate as Usual” on page 107.
Clean the Tester
To clean the touchscreen, turn off the tester, then use a soft, lint-
free cloth that is moist with water or water and a mild detergent.
To clean the case, use a soft cloth that is moist with water or
water and a mild detergent.
WWarningX
Do not put the tester or the battery pack in water.
WCaution
To prevent damage to the touchscreen or the case,
do not use solvents or abrasive materials.
When you clean the touchscreen or the case, do not
let liquid get under the plastic around the
touchscreen.
See Information About the Tester
To see information about your tester On the home screen, tap
the TOOLS icon, then tap Version Information.
To see information about your remote tester
Connect the main and remote testers together (see Figure 6 on
page 17), then tap REMOTE on the Version Information screen.