Instructions

DSX-600 Series CableAnalyzer
Users Manual
6
 Remove the input signals before you clean the
Product.
 Do not put metal objects into connectors.
 Batteries contain hazardous chemicals that can
cause burns or explode. If exposure to chemicals
occurs, clean with water and get medical aid.
 Remove the batteries if the Product is not used for
an extended period of time, or if stored in
temperatures above 50 °C. If the batteries are not
removed, battery leakage can damage the Product.
 Replace the rechargeable battery after 5 years of
moderate use or 2 years of heavy use. Moderate use
is defined as recharged twice a week. Heavy use is
defined as discharged to cutoff and recharged daily.
 Disconnect the battery charger and move the
Product or battery to a cool, non-flammable location
if the rechargeable battery becomes hot (>50 °C,
>122 °F) during the charge period.The battery door
must be closed and locked before you operate the
Product.
 The battery door must be closed and locked before
you operate the Product.
 Repair the Product before use if the battery leaks.
 Recharge the batteries when the low battery
indicator shows to prevent incorrect measurements.
 Turn off the Product and disconnect all test leads,
patch cords, and cables before you replace the
battery.
 Do not disassemble or crush battery cells and
battery packs.
 Do not put battery cells and battery packs near heat
or fire. Do not put in direct sunlight.
 Have an approved technician repair the Product.