Instructions

Chapter 2: Certify Twisted Pair Cabling
The DSX-600 Series CableAnalyzer Home Screen
27
: The number of tests that failed.
: The number of tests with an overall marginal result.
 The test setup panel shows the settings the tester will use
when you tap TEST or press . To change these settings,
tap the panel.
 Icons show the status of the Store Plot Data and AC Wire Map
settings. See Table 2 on page 33.
 Next ID: The Next ID panel shows the ID that the tester gives
to the next test results you save.
Tap Next ID to do these tasks:
 Enter an ID, select a different ID in the ID set, select a
different set of IDs, or make a new set. The tester adds the
IDs and ID sets you make to the project that shows on the
home screen.
 Turn Auto Save on or off.
 Operator: The name of the person who does the job. You can
enter a maximum of 20 operator names. For each operator you
can also enter the email address that the operator will use as an
ID to sign in to LinkWare Live.
 TOOLS: The TOOLS menu lets you set the reference, see the
status of the tester, and set user preferences such as the
language and the display brightness.
 RESULTS: Tap RESULTS to see and manage the results that are
saved in the tester.
 SYNC: Tap SYNC to sync projects with LinkWare Live.
 TEST: Tap TEST to do the test shown in the test setup panel.
 The percentage of the project that is completed. The
percentage is the number of IDs used for saved results divided
by the total number of used and available IDs in the project.