Instructions

DSX-600 Series CableAnalyzer
Users Manual
78
Set Up a Project
Refer to the PROJECT screen in Figure 29 on page 79.
1 On the home screen, tap the PROJECT panel, tap CHANGE
PROJECT, then tap NEW PROJECT.
2 On the NEW PROJECT screen, enter a name for the project,
then tap DONE.
3 On the PROJECT screen, tap the Operator panel to enter an
operator name for the project.
4 On the PROJECT screen, tap the NEW TEST button to enter
the tests and test settings necessary for the project.
5 On the PROJECT screen, tap the NEW ID SET button to make
one or more sets of cable IDs for the project. See the CABLE ID
SETUP screen in Figure 30 on page 82.
6 On the PROJECT screen, tap DONE.
The PROJECT Screen
To start a new project, tap the PROJECT panel on the screen.
Figure 29 shows the PROJECT screen and describes the items you
enter to make a project.
 The name of the project. See also item .
Projects you download from LinkWare Live include the
organization name. They can also include subproject names. On
the tester’s PROJECT screen, these names show in this format:
Organization Name>>Project Name>>Subproject Name. See
“About Project Names from LinkWare Live” on page 81.
 Operator: The name of the person who will do the tests for the
project. For each operator you can also enter the email address
that the operator will use as an ID to sign in to LinkWare Live.
 The date range for the results in the project.