Datasheet

Record Fast Fiber Certification
We engineered the DTX Fiber Modules to accelerate testing through exclusive
technology and an easy-to-use interface. Press the Autotest button and automatically
test two fibers, each at two wavelengths, measure length, and determine pass or fail
status – all in about 12 seconds. Our fiber modules let you test more fibers in less
time, minimizing testing costs and freeing you up for other tasks.
Unlike competitive fiber adapters which measure length and
two loss measurements per Autotest, DTX is the only fiber
test solution that measures length and four loss
measurements per Autotest - all in about 12 seconds.
Deliver Complete Tier 1 (Basic) Certification
DTX fiber modules provide a complete certification solution – loss, length and polarity. Validate fiber link performance and installation
quality. Measure optical loss at multiple wavelengths, measure fiber length and verify polarity. You can bi-directionally test two fibers at two
wavelengths with incredible speed without swapping main and remote units, a capability only available from Fluke Networks.
Certify Multimode and Singlemode Fiber
Your network may contain both multimode or singlemode fiber types. By combining 2 sets of modules, you can certify any multimode and
singlemode fiber at 850, 1300, 1310, and 1550nm. Then save, upload, manage and print comprehensive certification reports using Fluke
Networks LinkWare software.
Encircled Flux Compliant Multimode Fiber Testing
TIA-526-14-B and IEC 61280-1-4 now require tighter launch conditions to reduce measurement uncertainty. With the DTX-EFM2, users who
are familiar with the DTX CableAnalyzer can easily make use of these new modules to perform EF compliant testing with no additional
training. The DTX-EFM2 with the Encircled Flux Test Reference Cords (EF-TRCs) provide the most efficient and practical EF standards
compliant testing solution. These EF-TRCs are individually tuned so that any DTX-EFM2 produces an EF compliant launch at the end of the
EF-TRC.
Find Faults Faster
Use the integrated on-module visual fault locator (VFL) to troubleshoot simple link problems. The bright laser-driven VFL helps you visually
locate many near-end fiber faults, and is useful for continuity and polarity verification. Our integrated design ensures that the VFL is always
on-hand when you need it.
You Only Need One Compact Field Tester
Fluke Networks is committed to providing innovative solutions for testing and certifying copper and fiber cabling systems. Simply add these
powerful modules to your DTX CableAnalyzer to certify, troubleshoot and document your fiber installations – today and tomorrow – with one
compact field tester.
2 of 4