Brochure

Isolate the right cable or pair – fast
Cabling installations have become increasingly complex, which has made cabling increasingly
difficult to locate with traditional technologies.
When cables are run together for even short lengths, a signal from one can bleed over to another.
One cable might carry the original signal; other cables might carry the signal as a result of bleed.
Isolating cables with traditional tools requires guesswork, training, time for repeated testing – and
even the best efforts often result in mistakes.
IntelliTone Pro provides two cutting-edge technologies to isolate cables or wire pairs. Digital mode
can be used to isolate twisted-pair cables on a switch or within a bundle. SmartTone™ analog mode
can be used to isolate wire pairs at an unterminated outlet.
Overcome noise – and save hours of time
Fluorescent lights, machinery, computer monitors and electrical wiring all produce noise that slows
down cable location. Together, the IntelliTone Pro Toner’s synchronized digital signal and the
IntelliTone Pro Probe’s microprocessor controlled signal identification technology reject noise and
false signals to clearly identify cable location. This can save you hours every week on cable location
projects.
Tone on live networks safely and effectively
Modern network devices use common mode termination for cables connected to their ports. This reduces noise and crosstalk in the cable; but, it
can also absorb a traditional toner signal. Unlike traditional signals, the IntelliTone digital signal stays strong despite common mode termination.
And the IntelliTone Pro 200 LAN Toner automates toning individual cable conductors, making it quick, efficient and safe to locate cables on active
networks.
Verify conductor continuity with cablemap
Eliminate callbacks during cabling moves, adds and changes with the powerful diagnostic capabilities of IntelliTone™ Pro 200 LAN. The
IntelliTone Pro 200 Probe features a Cablemap capability that identifies common cable miswires in twisted pair cabling. IntelliTone technology
automates the testing of each conductor for end-to-end continuity; LED lights and tones clearly indicate miswires.
Identify and troubleshoot cable services
Service – Is the RJ45 jack a datacom jack, or a dead jack? IntelliTone Pro 200 LAN Toner LEDs clearly identify common datacom services found
on today’s networks including 10/100/Gigabit Ethernet links.
Continuity – Once you’ve located a cable, the next step is to verify cable conductor continuity. IntelliTone Pro 200 LAN Toners make it easy –
eliminating the need for a separate diagnostic tool.
2 of 5