Specification Sheet

Locate cables quickly and easily
Fluke Networks has applied decades of cable test engineering expertise to the science of locating copper cables. The result is
what we call IntelliTone technology – a digital signal-toning and signal-interpreting process that rapidly zeroes in on cables.
IntelliTone technology energizes cable conductors with a smart, sychronized digital signal. Multiple tone types occur in the
signal that help you to: LOCATE the correct cable bundle using maximum radiation. ISOLATE a cable within the bundle using
a signal with minimum radiation. VERIFY cable conductor continuity with an automated signal that steps through each
conductor.
Locate hidden cables
One of the toughest, most time-consuming parts of locating a cable has been in tracing its path amidst multiple cables and
bundles in wiring closets. The IntelliTone digital signal features a LOCATE tone that provides maximum radiation, allowing you
to quickly locate hidden and hard-to-find cabling.
Isolate the right cable or pair – fast
Cabling installations have become increasingly complex, which has made cabling increasingly difficult to locate with traditional
technologies. When cables are run together for even short lengths, a signal from one can bleed over to another. One cable
might carry the original signal; other cables might carry the signal as a result of bleed. Isolating cables with traditional tools
requires guesswork, training, time for repeated testing – and even the best efforts often result in mistakes. IntelliTone Pro
provides two cutting-edge technologies to isolate cables or wire pairs. Digital mode can be used to isolate twisted-pair cables
on a switch or within a bundle. SmartTone™ analog mode can be used to isolate wire pairs at an unterminated outlet.
Overcome noise – and save hours of time
IntelliTone™ Pro 200 LAN Toner and Probe Series Page 2 of 8
DATASHEET