Datasheet

29
1-800-283-5853 (US and Canada) • www.flukenetworks.com
Tools and Test Kits
JackRapid
™
Termination Tool
The JackRapid termination tool is the industry’s most innovative and time-saving installation
tool. JackRapid allows you to terminate jacks eight times faster than traditional impact tools
– with accuracy that’s unmatched. The patented jack termination tool seats and terminates all
wires simultaneously with one squeeze of an ergonomic handle. The built-in blade cuts off the
excess wire after it is seated in the connector, eliminating the need for a secondary trim step.
Simple, one-handed operation reduces hand fatigue. With JackRapid, you’ll never punch into the
palm of your hand or through drywall again.
• Cuts installation time – easy-to-use handle, seats and cuts all wires at once, saving you up to
two minutes installation time per jack
• High-quality, consistent terminations – no more compromised connections and wasted jacks
• Simple, one-handed operation with an ergonomically designed handle reduces hand fatigue
Model Description
JR-LEV-1 JackRapid termination tool (for Leviton 41106, 41108, 5G108)
JR-LEV-1-H JackRapid replacement blade head (for Leviton 41106, 41108, 5G108)
JR-SYS-UNI-1 JackRapid termination tool (for Systimax MPS100E, C5,M1BH and Uniprise UNJ600/500/300)
JR-SYS-UNI-1-H JackRapid replacement blade head (for Systimax MPS100E, C5, M1BH and Uniprise UNJ600/500/300)
JR-LEV-2 JackRapid termination tool (for Leviton 61110, 5G110, 6110G)
JR-LEV-2-H JackRapid replacement blade head (for Leviton 61110, 5G110, 6110G)
JR-SYS-2 JackRapid termination tool (for Systimax MGS400, MGS500, MFP420, MFP520)
JR-SYS-2-H JackRapid replacement blade head (for Systimax MGS400,MGS500, MFP420, MFP520)
JR-ORT-2 JackRapid termination tool (for Ortronics TJ5E00, TJ600, TJ610)
JR-ORT-2-H JackRapid replacement blade head (for Ortronics TJ5E00,TJ600, TJ610)
JR-ADC-2 JackRapid termination tool (for ADC KM8, Copper Ten®)
JR-ADC-2-H JackRapid replacement blade head (for ADC KM8, Copper Ten®)
JR-ERGOHANDLE JackRapid ergonomic handle
JR-PAN-2 JackRapid termination tool (for Panduit NK688M)
JR-PAN-2-H JackRapid replacement blade head (for Panduit NK688M)
Get accurate terminations and clean, consistent cuts every time with the JackRapid Termination Tool.
1. Strip cable jacket with a standard cable
stripper or the built-in cable stripper.
2. Determine wiring scheme.
Dress all four pairs (eight wires).
3. Insert jack in JackRapid front first with
IDC slots facing blades of JackRapid.
4. Ensure jack is completely and
securely inserted in jack holder bed
with IDC slots facing the blades.
5. Pull trigger completely and remove
excess wire prior to releasing trigger.
6. Wires will be seated and cut
for a solid termination.
To learn more visit: www.flukenetworks.com/jackrapid