User Manual

SimpliFiber Pro Meter and Test Kits
Users Manual
24
Using the Min/Max Function
The Min/Max function shows the minimum and maximum
power levels measured for each wavelength.
To enable the Min/Max function:
1 On the meter, hold down M for 4 seconds to enter
setup mode.
2 Press R D so that appears.
3 Press M until POWER appears; then press M again to
see the Min/Max measurements (Figure 9).
The meter shows the minimum (Min)
and maximum
(Max) power levels measured since you entered the
power measurement mode at the selected wavelength.
4 To switch between minimum and maximum values,
press
R D.
Notes
The meter records new minimum and maximum
val
ues each time the wavelength changes.
You cannot save power measurements or set the
refere
nce if Min or Max appear on the display.
ffl14.eps
Figure 9. Power Measurement Display with Min/Max
Function Enabled