User Manual

Specifications
39
1310 nm/1550 nm Singlemode Source
FP laser: dual 1310 nm/1550 nm
1310 nm: ±20 nm
1550 nm: ±30 nm
1310 nm: 2 nm (maximum)
1550 nm: 3 nm (maximum)
1310 nm/1550 nm: ≥ -7 dBm (typical)
±0.25 dB over 8 hours
Yes. Can be enabled or disabled by the user.
Fixed SC
Yes. Fixed at ID 2.
CW (continuous wave), 2 kHz, auto-wavelength
Emitter type
Central wavelength
Spectral width (RMS)
Minimum output power
Power output stability
1
Auto dual-wavelength switching
Optical output connector
FindFiber ID generation
Modes
1. 23°C ±2°C, after 5 minutes of warm-up time.