Datasheet

Cleaning Instructions:
After removing one plastic cover, apply a
small spot of solvent to the starting corner of
the cleaning zone.
Holding the connector perpendicularly, swipe
the end-face from the wet spot into a dry zone.
After pulling a clean wipe from the cube,
apply a small spot of solvent to the starting
edge of the wipe.
Holding the connector perpendicularly, swipe
the end-face from the wet spot into a dry zone.
After pulling a clean wipe from the cube, apply
a small spot of solvent to the starting edge of
the wipe.
Touch the swab to the wet spot on the wipe
for 3 seconds to absorb a minimal amount of
solvent. A damp swab works better than a wet
one. Applying solvent from the pen directly to
the swab will likely result in excessive solvent.
Insert the swab into the port and turn several
times while applying gentle pressure. Follow
the damp swab with a dry one, using the
same procedure to remove any remaining sol-
vent from the end-face and alignment sleeve.
A. Fiber Optic Cleaning Cards
B. Fiber Optic Cleaning Cube
C. Fiber Optic Solvent Swabs
Fiber Optic Cleaning Kit
NFC-Kit-Case
Ordering Information
Model Description
NFC-Kit-Case
Fiber Optic Cleaning Kit includes cleaning cube with wipes, ten cards with sealed cleaning zones, solvent pen, 2.5 mm port
cleaning swabs and 1.25 mm port cleaning swabs in a rugged carrying case.
NFC-Kit-Box
Fiber Optic Cleaning Kit includes cleaning cube with wipes, five cards with sealed cleaning zones, solvent pen and 2.5 mm port
cleaning swabs.
NFC-Cube Cleaning cube with wipes cleans up to 500 end-faces
NFC-Cards-5pack 5 cards with 12 sealed cleaning zones each – perfect for troubleshooting
NFC-SolventPen Special solvent dispensed from pen (9g)
NFC-Swabs-1.25mm LC and MU port cleaning swabs (25 count)
NFC-Swabs-2.5mm SC, ST, 2.5 mm port cleaning swabs (50 count)
NFC-SWABS-MULTI MPO port cleaning swabs (25 count)
NFC-Case Carrying case for cleaning accessories
Support GLD-FTINSPECTOR 1-Year Gold Support coverage for the FiberInspector and kits: Models - FT500, FT525, FT600