Data Acquisition System/Data Logging System Getting Started Guide

Getting Started
Managing Your Network Using Fluke DAQ
63
Configuring Web and Alarm Mail Settings
You can use the Web and Alarm Mail Settings dialog to enter Fluke DAQ web
configuration information and to configure Fluke DAQ to send e-mail messages
reporting alarm condition.
The Web Settings portion of dialog is used to specify a URL where scanned values
from your 268XA device will be sent. Use the Alarm Mail Settings portion of the
dialog to configure Fluke DAQ to automatically send e-mail messages reporting
alarm condition using the Simple Mail Transfer Protocol (SMTP).
Note
To use the e-mail and web features, your PC must be connected to a
network supporting the Transmission Control Protocol/Internet
Protocol (TCP/IP).
To enter web and alarm mail settings
• Click the
button on the Fluke DAQ toolbar and the System Security
Dialog appears.
alg132s.bmp