Datasheet

4 Fluke Corporation Fluke 87V IMSK Industrial Multimeter Service Kit
Ordering information
Fluke 87V IMSK Industrial Multimeter Service Kit
Included
Fluke 87V Industrial Multimeter, Fluke i400 400 A AC Current Clamp,
80BK-A DMM Temperature Probe, TL75 Hard Point Test Lead Set,
AC175 Threaded Alligator Clip Set
Fluke Corporation
PO Box 9090, Everett, WA 98206 U.S.A.
Fluke Europe B.V.
PO Box 1186, 5602 BD
Eindhoven, The Netherlands
For more information call:
In the U.S.A. [phone] or
Fax [phone]
In Europe/M-East/Africa [phone] or
Fax [phone]
In Canada (800)-36-FLUKE or
Fax [phone]
From other countries [phone] or
Fax [phone]
Web access: http://www.fluke.com
©2019 Fluke Corporation.
Specifications subject to change without notice.
Printed in U.S.A. 10/2019 6012860a-en
Modification of this document is not permitted
without written permission from Fluke Corporation.
Fluke. Keeping your world
up and running.
®
Fluke i400 Specifications
i400 AC Current Clamp
Specifications
Nominal current range 400 A
Continuous current range 1 A - 400 A
Maximum non-destructive current 1000 A
Lowest measurable current 1 A
Basic accuracy 2 % + 0.06 A
(45-400 Hz)
(% reading + floor spec)
Useable frequency
5 Hz - 20 kHz
Output level(s)
1 mA/A
Safety specifications
Safety
CAT IV 600 V, CAT III, 1000 V
Maximum voltage
1000 V AC rms from earth to ground, in compliance with EN61010
Mechanical and general specifications
Warranty
1 year
Maximum conductor diameter
32 mm (1.25 in)
Maximum conductor size (busbar)
750 MCM
Output cable length
1.5 m (59 in)
Shrouded banana plugs
Yes