Lawn Mower User Manual

Fitting the Lower Handle to the Lawnmower
1. Feed the hook (A2) attached to the lower handle (A1) halfway
through the centre slot of the guide (A3), in the direction indicated by
the arrow (A4).
2. Maintaining the hook (A2) in the centre slot of the guide (A3) turn
the lower handle (A1) clockwise through 90
0
to place both legs of
the lower handle in position between the hood brackets (A5). as
illustrated in Fig A.
3. Fit the lower handle (B1) to the deck with the lower handle pin (B2) as
illustrated in Fig B.
Fitting the Wheel frame to the lawnmower
1. Attach the wheels (C1) to the wheel frame (C2) with the wheel
retaining clips (C3) as illustrated in Fig C.
2. Fit the wheel frame (D1) to the deck with the lower handle bolt (D2),
small washer (D3), large washer (D4) and locknut (D5) as illustrated in
Fig D.
3. Locate the lower telescopic tubes (E1) inside the upper telescopic
tubes (E2) and secure with the pin (E3) and retaining clip (E4) as
illustrated in Fig E.
For further information, refer to the full Instruction Booklet supplied
with your product.
GB