Operation Manual

q
w
r
4. Place the hinge
w
of the upper tube into the hook
q
on the
bottom side of the unit.
5. Using the ground for support
e
, pivot the blower unit until
tube snaps into the latches of the retaining posts
r
on the
blower unit.
NOTE: A safety switch will prevent the
unit from starting if the vacuum tubes are
not installed correctly.
e
“Snap”
Attaching the collection bag:
23
t
z
9
0
1. Align the grooves on the elbow tube
t
with the grooves on the
blower outlet
2
.
2. Push the elbow tube onto the blower outlet until it snaps into
place; elbow tube is secured by tube release button
3
.
3. Clip the collection bag
z
to the loops on the upper vacuum
tube
9
and lower vacuum tube
0
.
NOTE: A safety switch will prevent the unit from starting if the
elbow tube is not installed correctly.
Attaching the shoulder strap:
u
For extra support when using your unit as a vacuum, a shoulder
strap is included with your unit. Attach the strap to the unit before
operation. Snap the hook onto the retainer
u
.
21
GB
9667594-01_9667594-62 PowerVac 3000 3000-20.960.01.indd 21 19.06.15 12:38