Operation Manual

6. Maintenance

WARNING: Stop the unit and disconnect the plug from the power source

before making any adjustments, changing accessories, or performing

maintenance.

Such preventive safety measures reduce the risk of starting the power tool

accidentally.

BEFORE EACH USE

Check for loose fasteners

and parts:

Keep all nuts, bolts and screws tight to be sure the product is

in a safe working condition. Be sure all parts are assembled

properly.

• Inlet Cover

• Blower Tube

• Vacuum Tubes

• Collection Bag

Check for damaged or

worn parts:

Contact your authorized service dealer for replacement of

damaged or worn parts.

• ON/OFF Switch – Ensure switch functions properly by moving

the switch to the OFF position. Make sure motor stops;

then restart motor and continue.

• Inlet Cover – Discontinue use of unit if inlet cover fails to latch

properly or if it is damaged in any way.

AFTER EACH USE

Inspect and clean unit

and labels:

DANGER! Risk of electric shocks!

Never clean the ventilation slit with a metal

object.

• After each use, inspect complete unit for loose or damaged

parts. Clean the unit using a damp cloth.

• Wipe off unit with a clean dry cloth.

Clean collection bag:

IMPORTANT: THE COLLECTION BAG MUST BE PROPERLY

EMPTIED.

• You must properly empty and maintain the collection bag to

avoid deterioration and obstruction of air flow.

• Remove the collection bag from the unit and empty after each

use. Do not store bag without emptying the bag of all contents

(grass, leaves, etc.).

• Wash the bag once a year. Remove the bag from the blower

and turn the bag inside out. Wash the bag with a water hose.

Allow the bag to hang and dry completely before you reuse

the bag.

9667594-01_9667594-62 PowerVac 3000 3000-20.960.01.indd 25 19.06.15 12:38