Instruction Manual

6
❏
3. Join the stab/fi n assembly to the fuselage, keying the
rudder into the hinge.
❏
4. Tighten the assembly to the fuselage with the included
bolt and a Phillips screwdriver.
ON
Centered
Down
❏
5. If necessary, install batteries in your transmitter. Turn on
the transmitter, center the trims and move the throttle stick
all the way down.
❏
6. Disconnect any one of the three motor wires so the motor
will not turn inadvertently.
❏
7. If your receiver is not already “bound” or linked to the
transmitter, follow the instructions that came with your radio
system to bind the two together so the receiver will receive
signals from the transmitter.
❏
8. Attach the softer, “loop” side of the included hook-and-
loop strip to the battery.
❏
9. Connect the battery to the ESC.