Replacement Part List

ASSEMBLY

Step 1 - Attach Wheels

Rotate and press the wheel axle in to the mating hole until the wheel snaps and locks into position and will not slide off.

Repeat process on the other side of the pressure washer to install the second wheel.

Step 2 - Attach Storage Hook

Slide the accessory holders into place.

Step 3 - Attach High Pressure Hose to Spray Gun

Attach end of the high pressure hose to the inlet located in the bottom front of the pressure washer. Attach the spray gun to

the high pressure hose, unlock the coupler located on the spray gun by sliding it into position “A”. Attach the high pressure

hose, then lock the spray gun to the high pressure hose by pushing the coupler to position “B”. To confirm the high pressure

hose is locked into the spray gun, pull gently on the hose.

Step 4 - Attach Spray Nozzle

Insert the adjustable spray nozzle into the spray gun. Turn the adjustable nozzle clockwise until it is hand tight and it locks

in place. To confirm that spray nozzle is locked into the spray gun, gently attempt to pull the two components apart. The

components should remained locked together.