TDS
HOW TO SPECIFY
Surface shall be Formica Inniti
™
laminate sheets from Formica
Corporation, Cincinnati, Ohio.
COLOR NUMBER
COLOR NAME
GRADE A7
FINISH AN
ANSI/NEMA STANDARDS PUBLICATION
– INDOOR BROCHURE APPEARANCE
CODES AND SPECIFICATIONS
Greenguard Gold Indoor Air Quality Certied
®
NSF approved
ANSI / NEMA LD3-2005 Compliant
SEFA 8.1 Approved
ASTM G 21 Approved
JIS Z 2801 Approved
ASTM D 4265 -98 (Anti-fingerprint)
PRODUCT SPECIFICATIONS
COLORS AND PATTERNS
Formica Inniti
™
laminate sheets are available in all Formica
®
Brand
standard colors. Note: Color will tend to shift from standard
laminate. Request a sample for true color representation.
Formica Inniti
™
laminate sheets meet the minimum performance
standards of the International Organization of Standardization, ISO
4586-2, and of the National Electrical Manufacturers Association,
ANSI/NEMA LD3-2005.
USE AND CARE
Formica Inniti
™
laminate may be cleaned with a damp cloth and
mild detergent. Use of abrasive cleaners, powders, scouring pads,
steel wool, sandpaper, etc., will damage the nish and can
permanently reduce the stain and chemical resistance of the
laminate. Due to the chemical resistant nature of Formica Inniti
™
laminate, the use of bleach, ammonium chlorides and other
antimicrobials will not harm the surface. Burnishes can be
removed by the following thermal healing process.
TECHNICAL SERVICES
Full copies of a specic test report can be obtained by calling
1-800-FORMICA
™
(option 2). All reports from independent
research organizations and test labs apply only to the actual
specimen or specimens studied and not to any similar materials
or product, nor to any production run of such material or products.
Any information or suggestion concerning applications, specications
or compliance with codes or standards is provided solely for
your convenient reference and without any representation as to
accuracy or suitability. Formica Corporation disclaims any legal
responsibility. The user must verify and test the suitability of any
information or products for their own particular purpose or specic
application.
THERMAL HEALING
Tools needed: iron, paper towel, water
Place paper towel on the burnished area and spray with water.
Iron 4 to 5 times with the iron on its highest setting. Remove paper
towel and wipe dry. Repeat as needed.
Note: Thermal Healing process will not repair scratches and
gouges.
TECHNICAL DATA
Performance compliance of Formica Infiniti
™
by Formica Group:
FTB-0882 - 7/17
FORMICA INFINITI
™
SURFACING BY FORMICA GROUP TECHNICAL DATA continued
PHYSICAL
PROPERTIES
LD 3
TEST
FORMICA
INFINITI™
NEMO
STANDARDS
Appearance
3.1
No ABC Defects No ABC Defects
Cleanability/Stain Resistance
Reagents 1 – 10
Reagents 11 – 15
3.4
No Effect
Slight Effect
Slight Effect
Slight Effect
Boiling Water Resistance
3.5
Slight Effect Slight Effect
High Temperature Resistance
3.6
Slight Effect Slight Effect
Linear Glass Scratch
3.7
50-100 Moderate 50-100 Moderate
Ball Impact Resistance (in)
3.8
30” (588 mm) 30” (588 mm)
Dart Impact Resistance (in)
3.9
11.8” (300 mm) 11.8” (300 mm)
Radiant Heat Resistance (sec)
3.10
55 100 (minimum)
Dimensional Change
Machine Direction
Cross Direction
3.11
1.0%
1.2%
1% (maximum)
1.4% (maximum)
Water Resistance (cycles)
3.13
550 400 (minimum)
Forming @ 325°F,
325-355°F
3.14
5/8” (16mm) 5/8” (15.9 mm)
minimum
Fire Rating C Unbonded Flame 180 Smoke 300
Fire Rating B 3/4in FRPB Flame 55 Smoke 200
GRADE TYPICAL
THICKNESS
FINISH
SIZE
A7 (Postformable)
.037”(0.9mm)
-AN 4’ x 8’