Model: FCTIN0539-36 Five Burner User Guide
Table of Contents I. Important Safety Information..................................................1-4 II. Control Panel Overview..........................................................5 III. Specifications & How to Use................................................6 • Heating Power for Each Cooking Zone.................................6 • Operating the keys ...............................................................7 • Switching on the hob and cooking zones..............................
I. Important Safety Information When using electrical appliances,basic safety precautions should always be the Induction cooker,even with the built-in safety features,it is essential to heed all precautons. Installation of the appliance into a kitchen countertop and its connection to the main power and electrical supply may only be performed by a qualified technician. .followed.For While cooking any overflowed fat or oil on the cooktop may ignite.
I. Important Safety Information Proper Installation-Be sure your appliance is properly installed and grounded by a qualified technician. Never Use Your Appliance for Warming or Heating the Room. Do Not Leave Children Alone-Children should not be left alone or unattended in area where appliance is in use. They should never be allowed to sit or stand on any part of the appliance. Wear Proper Apparel-Loose-fitting or hanging garments should never be worn while using the appliance.
I. Important Safety Information Do Not Cook on Broken Cook-Top-If cook-top should break, cleaning solutions and spillovers may penetrate the broken cook-top and create a risk of electric shock. Contact a qualified technician immediately. Do Not Cook on Broken Cook-Top-If cook-top should break, cleaning solutions and spillovers may penetrate the broken cook-top and create a risk of electric shock. Contact a qualified technician immediately.
I. Important Safety Information This product should not be thrown away as household waste. Instead it should be handed over to the applicable collection point for the recycling of electrical and electronic equipment. By ensuring this product is disposed of correctly, you will help prevent potential negative consequences to the environment and human health, which could otherwise be caused by inappropriate waste handling of this product.
II. Control Panel Overview 2 1. Front left cooking zone 5 2. Back left cooking zone 3. Back right cooking zone 3 1 4. Front right cooking zone 5. Middle cooking zone 6. Ceramic glass 6 7. Touch control panel 4 Diagram may look different from actual product. 7 13 14 11 12 10 7. Timer Control Keys 8 7 9 15 16 8. Lower time key 12.Cooking Zone ON/OFF key 13.Power or residual heat display 9. Raise time key 14.Power boost key 10.Lower power key 15.Power button 11.Raise power key 16.
III.
III. How to Use Readiness Mode While on standby mode, press the main “ ” key, the induction hob will make a “beep” sound once indicating that it is ready to use. If only the indicator light above the “ ” key is lit up, the unit will automatically return to standby mode if the Cooking zone ON/OFF key or Lock key are not chosen within 30 seconds. Switching on the hob and cooking zones Suitable for induction cooktop 1 9 P Place a compatible pot or pan on the cooking zone you wish to use.
III. How to Use Lock Activating the Child Safety Lock during cooktop use: Child Lock prevents activation of any sensor key, except for the “ ” key and the “Lock” key. A. Manual: Press the Lock key to activate the function. The unit will make a “beep” sound and the indicator light will turn on above the Lock key. The controls are now locked. B. Automatic: The induction cooktop will automatically enter into Lock mode if any key is not pressed within 5 minutes.
III. How to Use Timer Setting the Timer to Automatic switch-off: With the desired heating zone Powered ON, press the “Timer” key. The timer display will blink and show a “00”, Press the “+” or “-” to increase or decrease to the desired time until the desired time appears in the display (Choose up to 99 minutes). Once the Timer is set, if keys haven't been pressed after 5 seconds, it will begin to countdown, the timer display will remain lit, the indicator for that particular burner will flash.
IV. Compatible Cookware Induction requires pots and pans that are made of ferrous(meaning magnetic) materials. Check your cookware’s retail box for the induction symbol. To tell if your current cookware is compatible with the induction technology, grab a magnet and see if it holds to the bottom of the cookware.
V. Cleaning and Maintenance: Cleaning Burned on Residue: WARNING: Damage to the glass surface may occur if you use scrub pads or any other type of abrasive cleaning materials. 1. Allow the cooktop to cool. 2. Spread a few drops of the ceramic cooktop cleaner on the burned residue area. 3. Using the included ceramic cooktop cleaning pad, rub the residue area, applying pressure as needed. 4. If any residue remains,repeat the steps listed above. 5.
VI.Counter Installation Instructions for 1" thickness or less Warning! For Your Safety:Do not store or use gasoline or other flammable vapors and liquids in the vicinity of this or any other appliance.To eliminate the risk of burns or fire due to overheating,cabinets located above the induction unit should be avoided.If cabinet space is available, the risk can be reduced by installing a range hood that protects horizontally at a minimum of 5 inches below the bottom of the cabinets.
VI.Counter Installation Instructions: 70mm(2-3/4") Note:do not put a divider between the oven and cooktop OVEN Cooktop Dimensions A. Width B. Depth 36" 21" C. Height D. Height 5/32" 2-5/32" Cooktop Cutout Dimensions E.Depth F.Depth G.Depth H. Depth Minimum:34-14/16" Minimum:19-21/32" Minimum:13/32" Maximum:35-7/16" Maximum:20-1/16" Maximum:25/32" I.
VI.
15
VI.Counter Installation Instructions: Before installing the cooktop: 1. Visually inspect the cooktop for damage. Also make sure all cooktop screws are on tight. 2. Place the cooktop into the countertop cutout. Model and Serial Number Location: The serial plate is located under the cooktop. When ordering parts or making inquiries about your cooktop, be sure to include the model and serial numbers. Connecting to a 3 wire power supply cable electrical system 1. Disconnect the power supply. 2.
VI.Counter Installation Instructions: Connecting to a 3 wire power supply cable electrical system 3. Circuit breaker fuse rating must be above 50 A , and wire should be 2/6 or 3/6 copper. 4. Minimum acceptable size of conductors should be no less than 10AWG,copper only, and no less than167°F . 5. A wire-binding screw or stud used in the wire terminal should be 10 or larger. Warning! 1. The electrical power to the cooktop must be shut off while line connections are being made.
VII.Troubleshooting Error Codes If the display shows an error code, please refer to this sheet for a potential solution. Cooktop does not work Cooktop does not heat up The cooktop control panel may read liquids or objects obstructing the panel, which can cause the cooktop to shut off. Clean up spills or remove objects, then restart the unit.
VII.Troubleshooting Error Codes If the display shows an error code,please refer to this sheet for a potential solution. Error Code “E” appears on the Power display Possible Cause Electronics fault error message of specific cooking zone. Solution See E0,E1,E2,E3,E7,E8,E9,EE “E0” appears in the IGBT overheating. Timer display Turn of unit untl to allow IGBT to cool.Restart unit. No cookware found or improper “E1” appears in the placement of cookware on the Timer display cooking zone.
VIII.FCC STATEMENT: FCC STATEMENT; This device complies with Part 18 of the FCC Rules. NOTE: 1.This equipment has been tested and found to comply with the limits for a Consumer ISM equipment, pursuant to Part 18 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
Cookware “noise” Slight sounds may be produced by different types of cookware. Heavier pans such as enameled cast iron produce less noise than a lighter weight multi-ply stainless steel pan.The size of the pan, and the amount of contents, can also contribute to the sound level.When using adjacent elements that are set at certain power level settings,magnetic fields may interact and produce a low whistle or intermitted "hum".