Use and Care Manual

Cleaning Burned on Residue:

1. Allow the cooktop to cool.

2. Spread a few drops of the ceramic cooktop cleaner on the burned residue area.

4. If any residue remains,repeat the steps listed above.

Cleaning heavy burned - on residue:

1. Allow the cooktop to cool.

Metal Marks and Scratches:

V. Cleaning and Maintenance:

NOTE:

will have to be replaced.Contact the manufacturer for assistance.

If cracks or indentations in the glass surface occurs,the cooktop glass

If pots with a thin overlay of aluminum or copper boil dry,the overlay may leave a

black discoloration on the cooktop.This should be removed immediately before

using the cooktop again or the discoloration will become permanent.

Be careful not to slide pots or pans across the cooktop surface. It will leave behind

metal markings. These marks are removable using the ceramic cooktop cleaner

along with the cleaning pad for ceramic cooktops

For additonal protection,after all residue has been removed,polish the entire

surface with the ceramic cooktop cleaner and a paper towel.

After scraping off the residue,apply a few drops of the ceramic cooktop cleaning

solution on the entire burned residue area.Use the cleaning pad to remove any

remaining residue.

Used a single -

against the glass surface,and scrape o the residue.

edge razor blade scraper approximately at a 45 degree angle

ﬀ

For additonal protection,after all residue has been removed,polish the

entire surface with the ceramic cooktop cleaner and a paper towel.

Using the included ceramic cooktop cleaning pad, rub the residue area,

applying pressure as needed.

WARNING:

other type of abrasive cleaning materials.

Damage to the glass surface may occur if you use scrub pads or any