Instruction Manual

INSTALLATION PREPARATION

* Please plug in and check that all functions are working

* Remove stainless steel baffle filter and grease tray.

TOOLS AND MATERIALS REQUIRED

(Not supplied)

encil and tape measure

ct tape

Wire cutter/stripper Wrench

Hammer Keyhole Saw

Level Safety glasses

Step ladder

Electric or battery-operated

drill and 1/8", 3/8" bits

Wire nuts

10" round metal duct,

length to suit installation

Pliers Metal Snips

Saber saw or Sawzall Flashlight

Screwdrivers Strain relief for joint cover.

120V 60Hz. 15 or 20 Amp, 2-wire with ground.

Properly grounded branch circuit.