User Manual

STARTING THE FRIDGE

After the fridge has been properly connected to a power source, the compressor will automatically turn on and the

cabinet will begin cooling. Allow the cabinet to cool for at least 4 hours prior to adding food items.

OPERATION

Tap any key for the first time and the control panel will be activated. If there is no button selection for one minute, the

LED display will automatically go off.

MODE

Tap the “Mode” button to select your desired operation mode. Available modes are: Quick Cool, Quick Freezer and

Optimal.

QUICK COOL

The fridges temperature will be set to 35°F and will run for 12 hours. After 12 hours, this mode will automatically disable

and resume normal operation.

QUICK FREEZE

The freezers temperature will be set to -8°F and will run for 24 hours. After 24 hours, this mode will automatically disable

and resume normal operation. Note: Quick cool mode does not change the Quick Freezer mode.

OPTIMAL

Tapping the “Optimal” button will adjust the fridge temperature to 35°F and the freezer temperature to -1°F. If press any

button other mode or temperature is selected the “Optimal” mode will be disabled.

FRIDGE +/-

Tap the “Fridge +/-” button to adjust the temperature of your fridge. Note: The temperature range for the fridge is 34°F

to 44°F.

FREEZER +/-

Tap the “Freezer +/-” button to adjust the temperature of your freezer. Note: The temperature range for the freezer is

6°F to -8°F.

When desired temperature is selected the numbers will flash 5 times to confirm. If another mode is selected during that

period switched during the flashing period, switch will take effect immediately.

CELSIUS & FAHRENHEIT SELECTION

Press and hold down the “Fridge +/-” and the “Freezer +/-” button to switch between Celsius and Fahrenheit.

DOOR ALARM

Press and hold the “Mode” button for 3 seconds to disable the door alarm function. Note: the door

OPERATION