Chassis Guide FortiGate-5020 PSU A PSU B USB CONSOLE 1 62 53 4 5 6 ALT ON/OFF RESET STATUS USB IPM PWR CONSOLE 1 62 53 4 5 6 ALT ON/OFF RESET STATUS PWR IPM A detailed guide to the features and capabilities FortiGate-5020 chassis. This FortiGate-5020 Chassis Guide describes FortiGate-5020 hardware features, and how to install the FortiGate-5020 chassis.
Warnings and cautions Only trained and qualified personnel should be allowed to install or maintain FortiGate-5000 series equipment. Read and comply with all warnings, cautions and notices in this document. • • • • • • • • • • • • ! CAUTION: Risk of Explosion if Battery is replaced by an Incorrect Type. Dispose of Used Batteries According to the Instructions.
Contents Contents Warnings and cautions ..................................................................................... 2 FortiGate-5020 chassis...................................................... 5 FortiGate-5020 front panel ................................................................................ 5 FortiGate-5020 back panel ................................................................................ 6 Physical description of the FortiGate-5020 chassis..................................
Contents 4 FortiGate-5020 Chassis Guide 01-30000-0043-20061207
FortiGate-5020 chassis FortiGate-5020 front panel FortiGate-5020 chassis You can install one or two FortiGate-5000 series modules in the two slots of the FortiGate-5020 ATCA chassis. The FortiGate-5020 is a 4U chassis that contains two redundant AC to DC power supplies that connect to AC power. The FortiGate-5020 chassis also includes an internal cooling fan tray. If both slots contain FortiGate-5001SX modules, the FortiGate-5020 chassis provides a total of 16 Gigabit ethernet FortiGate interfaces.
FortiGate-5020 back panel FortiGate-5020 chassis FortiGate-5020 back panel Figure 2 shows the back of a FortiGate-5020 chassis. The chassis back panel includes two redundant AC power connectors and provides access to the hot swappable cooling fan tray. Each AC power connector includes a 25 Amp circuit breaker that also functions as the on/off switch for the AC power connector. You can use the power wire fixtures to secure AC power wires to prevent the power wires from being accidently disconnected.
FortiGate-5020 hardware procedures Mounting the FortiGate-5020 chassis FortiGate-5020 hardware procedures This chapter describes: • Mounting the FortiGate-5020 chassis • Connecting the FortiGate-5020 chassis to AC power • Turning on FortiGate-5020 chassis power • Inserting FortiGate-5000 series modules into a FortiGate-5020 chassis Mounting the FortiGate-5020 chassis Note: Mount the FortiGate chassis before installing the FortiGate-5000 series modules.
Turning on FortiGate-5020 chassis power FortiGate-5020 hardware procedures Turning on FortiGate-5020 chassis power Once the FortiGate-5020 chassis is connected to two AC power sources you can turn on the power by switching on the circuit breakers at the back of the FortiGate-5020 chassis (see Figure 2 on page 6 for location of the circuit breakers). The FortiGate-5020 chassis should power up.
Base backplane communications and HA between FortiGate-5020 chassis FortiGate-5020 base backplane interfaces Base backplane communications and HA between FortiGate-5020 chassis This chapter describes: • FortiGate-5020 base backplane interfaces • FortiGate HA between two FortiGate-5020 chassis FortiGate-5020 base backplane interfaces For the FortiGate-5020 chassis, you can use the FortiGate-5000 module base backplane interfaces for HA heartbeat communication and data communication between the two Forti
FortiGate HA between two FortiGate-5020 chassis Base backplane communications and HA between FortiGate-5020 chassis FortiGate HA between two FortiGate-5020 chassis The FortiGate-5020 chassis does not support direct ethernet connections between two or more FortiGate-5020 chassis. To configure HA for FortiGate modules installed in two different FortiGate-5020 chassis you must use one or two of the front panel interfaces of the FortiGate modules as HA heartbeat interfaces.
Base backplane communications and HA between FortiGate-5020 chassis FortiGate HA between two FortiGate-5020 chassis Figure 4: FortiGate-5001SX HA heartbeat interface configuration FortiGate-5020 Chassis Guide 01-30000-0043-20061207 11
FortiGate HA between two FortiGate-5020 chassis 12 Base backplane communications and HA between FortiGate-5020 chassis FortiGate-5020 Chassis Guide 01-30000-0043-20061207
For more information Fortinet documentation For more information Support for your Fortinet product is available as online help from within the web-based manager, from the Tools and Documentation CD included with the product, on the Fortinet Technical Documentation web site, from the Fortinet Knowledge Center web site, as well as from Fortinet Technical Support.
© Copyright 2006 Fortinet, Inc. All rights reserved. No part of this publication including text, examples, diagrams or illustrations may be reproduced, transmitted, or translated in any form or by any means, electronic, mechanical, manual, optical or otherwise, for any purpose, without prior written permission of Fortinet, Inc.