User Guide

Table Of Contents

Dongle Integration

1. Download the Envy Fortress Power APP Located both in Apple App Store and Google Play Store

on a mobile device.

2. Plug the Dongle to the inverter while inverter is energized.

3. Connect to the Dongles Wi-Fi Network usually named BA********

4. Access the Envy App and Press the WIFI Module ConnectProceed to integrating the Dongle to the Home Wi-Fi by

inputting the router’s SSID and Password. Server must be Set to North America. After clicking on Set, Click

HomeWifi Connect. The Dongle will display 3 solid LED’s if the connection was successful. This may take 1 minute

after selecting HomeWifi Connect.

If your cellphone does locate the customer’s Router as shown on the 5

step image, then proceed to access the web

browser on your cellphone or laptop while being connected to the dongle’s Wi-Fi signal as seen in the 3

step image.

Type 10.10.10.1>User: admin, Password: admin. Select English on the top right side. Next, Select Station Mode Setting

and input the internet router’s SSID and Password. Save and confirm that the Dongle has been integrated successfully

by displaying 3 solid LEDs after 1 minute.

Warning. You must not access nor change any other values in this web

portal. Doing so, may break the Dongle and make it inoperable.