Installation Guide

DECKING INSTALLATION : I-SERIES
33
Plusieurs longueurs de planches consécuves (VUE DE HAUT)
Espaced’expansionallouépourlesdiérencesdelongueurentrelesplanches
Breaker Boards
FIXED
WALL
FIXED
WALL
Expansion Gap
Single Board Lengths
Expansion Gap
Joist
Blocking
Multiple board lengths placed consecutively
Expamsion gap provided for the change in length of both boards.
Expansion Gap
Double joist on butt joins
Expansion Gap
FIXED
WALL
FIXED
WALL
Original length
Code Compliant gap
Code Compliant gap
Maximum allowable expansion point
Code compliance:
When installing against vertical structures, allow for both the code required spacing and the required expansion
gap to ensure board remain code compliant after board expansion.
Fig. 4
Conformité aux normes
 Lorsdel’installaonsurdesstructuresvercales,alloueràla
foisl’espacenécessairepourlaconformitéauxnormesetcelui
pourl’expansionandevousassurerquelesplanchesde-
meurentconformesauxnormesaprèsleurexpansion.
TelquemontrédanslaFig.5.
Espaced’expansion Espaced’expansion
Doublessolivessurlesjointsd’about
Breaker Boards
FIXED
WALL
FIXED
WALL
Expansion Gap
Single Board Lengths
Expansion Gap
Joist
Blocking
Multiple board lengths placed consecutively
Expamsion gap provided for the change in length of both boards.
Expansion Gap
Double joist on butt joins
Expansion Gap
FIXED
WALL
FIXED
WALL
Original length
Code Compliant gap
Code Compliant gap
Maximum allowable expansion point
Code compliance:
When installing against vertical structures, allow for both the code required spacing and the required expansion
gap to ensure board remain code compliant after board expansion.
Fig. 5
Espaceconforme
aux normes
Espaceconforme
aux normes
Longueur
originale
Pointd’expansionmaximalpermis
Mur
xe
Mur
xe
VUE DE
HAUT
INSTALLATION : ATTACHES
Conseils d’installaon :
Clous Aaches Perceuse
Fig. 3
Breaker Boards
FIXED
WALL
FIXED
WALL
Expansion Gap
Single Board Lengths
Expansion Gap
Joist
Blocking
Multiple board lengths placed consecutively
Expamsion gap provided for the change in length of both boards.
Expansion Gap
Double joist on butt joins
Expansion Gap
FIXED
WALL
FIXED
WALL
Original length
Code Compliant gap
Code Compliant gap
Maximum allowable expansion point
Code compliance:
When installing against vertical structures, allow for both the code required spacing and the required expansion
gap to ensure board remain code compliant after board expansion.
Une seule longueur de planches (VUE DE HAUT)
Mur
xe
Solive Fixaon
Planchestransversales
Espaced’expansion Espaced’expansion
Mur
xe