Dimensions Guide

I-SERIES | Technical Data Sheet
| 3
Material properties
Core material
Substance name
Approximate
weight %
CAS # Agency Exposure limit Note
Bamboo fibre 55 - 60 N/A OSHA PEL-TWA 15 mg per m Total dust
PEL-TWA 5 mg per m Respiratory dust fraction
TLV-TWA 3 mg per m Respiratory dust fraction
TLV-TWA 10 mg per m Inhabitable particles
HDPE - Polyethylene 35 - 40 9002-99-4 N/A N/A Thermoplastic
Cap
Information withheld
Additional Additives
Anti mould agent, coupling agent, uv stabilizers and colour pigments Information withheld
REACH SVHC compliant
The innovation of co-extruded technology resulted in the development of our Infinity® range. This advancement allowed for the cellulose-
polymer composite to be wrapped in a protective cap, further improving the product's longevity. Fortress's® engineered polymer coat is
loaded with a variety of additives that result in an extremely robust outer layer. This layer protects the products from weathering and
biodegradation, even within particularly harsh conditions
Surface properties
Measured value Units Test standard Notes
Value of residual indentation 0.08 mm EN 15534-1:2014 Falling ball test
Maximum crack length No crack mm EN 15534-1:2015 Falling ball test
Scratch resistance 20 N FORD FLTM BO 162-01
Colour fade - Tiger Cove 2.8 ΔE EN 15534-1:2014 3000 hours testing
Gloss Change 0.1 % EN 15534-1:2014 3000 hours testing
Finish V1 DIN equivalent rating (R11)
Slip resistance - Pendulum the with
Grain
36 EN15534-1 EN15534-4
Pendulum (PTV , SRV ) - Low
moderate chance
Slip resistance - Pendulum te across
Grain
33 EN15534-1 EN15534-4
Pendulum (PTV , SRV ) - Low
moderate chance
Abrasion 0.014 / 100 g/r GB/T24137-2013 grams/rotation
Brinell hardness Results pending
Cap delamination 60 / 50 N / mm ISO 24345-2006
Average peal off - 5.32 mm (max
allowable = 10mm)
Mechanical properties (ASTM D6109)
Spans (mm) 350 400 450 500
Maximum load (kN) N/A* N/A* 3.38 N/A*
Modulus of elasticity (MOE Mpa) N/A* N/A* 5 387.96 N/A*
Modulus of rupture (MOR Mpa) N/A* N/A* 30.48 N/A*
Total deflection (mm) N/A* N/A* 12.56 N/A*
Loads at L/180 (kN) N/A* N/A* 0.70 N/A*
Based on internal testing. *Untested