Installation Guide

Fe
26
TRADITIONAL INSTALLATION
11
Fig. 15
Fig. 16
UNIVERSAL BRACKET (UB-04): CUTTING DOWN PANEL
Step 1: Measure The Panel Opening Length
 1. Measurethedistanceofthepanelopening.Asshownin
 Fig.17.Conrmthatthemeasurementsforthetop
  bracketsarethesameastheboombrackets.
Note:
• Measure from the back wall of the bracket to the back
wall of the bracket on other post. As shown in Fig. 18.
Fig. 17
Fig. 18
Measure the panel opening
Checkmeasurementwithtop
DO NOT
measurefrom
post
Measure
fromback
of bracket