Installation Guide

Fe
26
TRADITIONAL INSTALLATION
13
Fig. 23
2X
UNIVERSAL BRACKET (UB-04): PANEL INSTALLATION
Step 1: Install I-Support On Boom Rail
 1. Measureandlocatethecenteroftheboomrail.Using
 theI-Supportasaguide,markthecenterofthe2screw
 holes.AsshowninFig.24.
 2. Usinga3/16”[5mm]drillbit,drillthoughtheoutside
 wall.
 3. InstalltheI-SupportwiththeprovidedPhillipsHead
 Screws.AsshowninFig.25.
Note:
 • BesuretoinstallI-Supportonsideofrailfacingdeck.
Fig. 24
3/16”
[5mm]
Hole
Fig. 25
Phillips
Head
Screws
 3. Applythe2
nd
coatofFortresszincbasedtouch-uppaint.
 4. Allowtodryandinstall.