Installation Guide

Fe
26
TRADITIONAL INSTALLATION
23
COLLAR BRACKET (CB-04): BRACKET INSTALLATION
COLLAR BRACKET (CB-04): POST MOUNTING
 • ReferencePostMounnginstruconsonpage5.
*DimensionAposionsboomedgeofrail3-3/4”[95mm]abovedecksurface.
*DimensionAismeasuredfromtheboomsurfaceofpostbase.
Fig. 42
CB-04 Bracket Hole Locaons
Pre-drill Dimensions: Pre-drillingwitha3/16”[5mm]drillbitisrequired
34” [864mm] Panel
38” [965mm] Panel
B
30-7/8”[784mm]
34-7/8”[886mm]
36-7/8”[937mm]
C
2-3/16”[56mm]
2-3/16”[56mm]
2-3/16”[56mm]
40” [1016mm] Panel
A*
3-3/16’”[81mm]
3-3/16’”[81mm]
3-3/16’”[81mm]
Step 1: Mark Bracket Hole Locaons
 1. Markthecenterlineofeachpostwithapencil.
 2. TakemeasurementsusedinFig.42and43tomarkbracket
 holelocaonsontoposts.
Tip:
• Remove all metal shavings from deck, post base cover,
post, and panel before bracket is screwed to post to
prevent rust stains.
Fig. 43
A
C
C
B
C
A