Installation Guide

30
Fe
26
TRADITIONAL INSTALLATION
ANGLE BRACKET (UB-04 & CBS-04)
Fe
26
Tradional Angle Brackets Installaon Opons
Ball Cap
UB-04 Cap
PressedDomeCap
Post
Base Cover
UB-04 Cup
2”X2”&3”X3”
[51mmx51mm]
&[76mmx76mm]
IronPostswithbase
Fe
26
TradionalPanel
6’,8’or10’
[1829mm,2438mm
or 3048mm]
Universal Bracket Angle Adapter (UB-04)
UB-04 Angle Adapter
*Installed panel heights include a 3-3/4”[95mm]spacebetweendecksurface
andboomedgeofboomrail.
*Postswithpre-aachedUB-04BracketsareavailablefortradionalpanelONLYinstallaons.
*Installed panel height of 42”[1067mm]includes a 2”[51mm]spacebetweendecksurfaceand
boomedgeofboomrails and is ONLYavailableforpostswithpre-aachedUB-04Brackets.
Fe
26
Tradional
Panel Height
Rail Panel
Installed Panel Height* RequiredPost
34”[864mm] 37-3/4”[959mm] 39-1/2”[1003mm]
38”[965mm]
41-3/4”[1061mm]
45-1/2”[1156mm]
40”[1016mm]
43-3/4”[1111mm]
45-1/2”[1156mm]
40”[1016mm]
42”[1067mm]
45-1/2”[1156mm]
Universal Bracket Angle Adapter (UB-04)PostConguraon
2”[51mm]or3-3/4”[95mm]
I-Support