Installation Guide

34
Fe
26
TRADITIONAL INSTALLATION
*DimensionAposionsboomedgeofrail3-3/4”[95mm]abovedecksurface.
*DimensionAismeasuredfromtheboomsurfaceofpostbase.
Fig. 53
Collar Bracket Side Adjustable (CBS-04) Bracket Hole Locaons
Pre-drill Dimensions: Pre-drillingwitha3/16”[5mm]drill bit is required
34” [864mm] Panel
38” [965mm] Panel
B
30-11/16”[780mm]
34-3/4”[882mm]
36-3/4”[933mm]
C
2-5/16”[59mm]
2-5/16”[59mm]
2-5/16”[59mm]
40” [1016mm] Panel
A*
3-3/16’”[81mm]
3-3/16’”[81mm]
3-3/16’”[81mm]
Fig. 54
A
C
C
B
C
A
CBS-04 Angled
Bracket
Step 2: Pre-drill Angle Bracket Holes
Tip:
• It’s important to double check dimensions to conrm
accuracy of bracket hole locaons before drilling.
 1. UseSpringPunchtomarktheholes.AsshowninFig.55.
 2. Pre-drillbracketholeswitha3/16”[5mm]drillbit.
AsshowninFig.56&57.
 3. RemovetheboltfromtheAngleBracketAssembly.