Installation Guide

Fe
26
TRADITIONAL INSTALLATION
35
Fig. 56
Fig. 55
Pre-Drill
witha3/16”
[5mm]
drill bit
Center of Post
1-3/16”
[30mm]
UB-04 Angle
Adapter
Fig. 57
Pre-Drill
witha3/16”
[5mm]
drill bit
Center of Post
2-15/16”
[75mm]
CBS-04 Angle
Bracket
Step 3: Install UB-04 Angle Adapter
 1. AachAngleAdapterBasepiecetothepostswithsupplied
 T-25Thread-CungScrews.Uselowspeedsengondrill.
AsshowninFig.58.
 2. AssembleAngleAdapterBodypiece&Basepiece.
AsshowninFig.59.
 3. AachUB-04BrackettoAngleAdapterusingT-25 
 Thread-CungScrews.AsshowninFig.60.
Tip:
• Use a Bit Extender for an easier drilling process.
Fig. 58
Fig. 59