Installation Guide

36
Fe
26
TRADITIONAL INSTALLATION
Fig. 60
Step 4: Install CBS-04 Angle Brackets
 1. AachAngleBracketBasepiecetothepostswithsupplied
T-25Thread-CungScrews.Uselowspeedsengondrill.
AsshowninFig.61.
 2. AssembleAngleBracketBodypiece&Basepiece.
AsshowninFig.62.
Tip:
• Use a Bit Extender for an easier drilling process.
Fig. 61 Fig. 62
Step 5: Determine Panel Length
 1. Checktoensurethatallpostsaresquareandstraight.Shim
  postsasrequired.
 2. EnsurethattheAngleBracketCupsareapproximately 
 aligned.
 3. Withanotherperson’shelp,measurethedistancefrom
the inside back of one cup to the inside back of the other
 cup.Thiswillbethepanellength.AsshowninFig.64&65.