Installation Guide

40
Fe
26
TRADITIONAL INSTALLATION
Fig. 67
UB-04 Angle
Adapter with ATP
A
B
A
C
Fig. 66
Bracket Hole Locaons: Angle Universal Bracket With ATP
Pre-drill Dimensions: Pre-drillingwitha3/16”[5mm]drillbitisrequired
•All panel sizes except 40” [1016mm] panel can use the ATP.
•Only 32” [813mm] and 34” [864mm] panels are used with ATP’s in California.
*DimensionAposionsboomedgeofboomrail3-3/4”[95mm]abovedecksurface.
*DimensionAismeasuredfromtheboomsurfaceofpostbase.
34” [864mm] Panel
32” [813mm] Panel
4-1/4’”[108mm]
4-1/4’”[108mm]
A*
4-1/4’”[108mm]
37-3/8”[949mm]
35-3/8”[899mm]
B
41-3/8”[1051mm]
1-3/16”[30mm]
1-3/16”[30mm]
C
1-3/16”[30mm]
4-7/8”[124mm]
D
38” [965mm] Panel
UNIVERSAL BRACKET ANGLE ADAPTER WITH ATP: INSTALLATION
 • ReferenceUniversalBracketWithAccentTopPanel(ATP) 
 installaoninstruconsonpages18-21.
 • ReferenceFig.66&67belowforbracketholelocaons.
D
4-7/8”[124mm]
4-7/8”[124mm]