Installation Guide

42
Fe
26
TRADITIONAL INSTALLATION
Fig. 68
Bracket Hole Locaons:
Collar Bracket Side Adjustable (CBS-04) With ATP
Pre-drill Dimensions: Pre-drillingwitha3/16”[5mm]drillbitisrequired
•All panel sizes except 40” [1016mm] panel can use the ATP.
•Only 32” [813mm] and 38” [864mm] panels are used with ATP’s in California.
*DimensionAposionsboomedgeofboomrail3-3/4”[95mm]abovedecksurface.
*DimensionAismeasuredfromtheboomsurfaceofpostbase.
34” [864mm] Panel
32” [813mm] Panel
3-3/16’”[81mm]
3-3/16’”[81mm]
A*
3-3/16’”[81mm]
30-5/8”[778mm]
28-5/8”[727mm]
B
34-5/8”[880mm]
2-3/16”[56mm]
2-3/16”[56mm]
C
2-3/16”[56mm]
2-1/2”[64mm]
2-1/2”[64mm]
D
2-1/2”[64mm]
2-1/2”[64mm]
2-1/2”[64mm]
E
2-1/2”[64mm]
38” [965mm] Panel
Angle Collar
Bracket With ATP
Fig. 69
C
A
C
A
B
C
D
E
COLLAR BRACKET SIDE ADJUSTABLE (CBS-04) WITH ATP:
INSTALLATION
 • ReferenceCollarBracketWithAccentTopPanel(ATP) 
 installaoninstruconsonpages26-29.
 • Whenmeasuringpanelopeninglength,measurefromback
  ofbracket,DO NOT measurefromtheinsidefaceofpost. 
 AsshowninFig.65onpage37.
 • ReferenceFig.68&69belowforbracketholelocaons.