Installation Guide

Fe
26
TRADITIONAL INSTALLATION
45
Fig. 70 Fig. 71
Fig. 72 Fig. 73
UB-04 Stair
Bracket
CB-04 Stair
Bracket
Step 2: Boom Bracket Installaon Connued (UB or CB)
 1. UseSpringPunchtomarktheholes. AsshowninFig.74.
 2. Drilloutbracketholewitha3/16”[5mm]drillbit.
AsshowninFig.75.
 3. UseT-25screwstoaachtheUBorCBbasetothepost. 
 Beginwithtopholethenboom.AsshowninFig.76.
 4. Keepbracketbasecenteredasyouinstallsecondscrew.
 5. Insertbarrel&screwtore-assemblebracket.
 6. Tightenbarrel&screw.AsshowninFig.77&78.
 7. UseT-25screwstoaachUB-04BrackettoUB-04Adapter.
 AsshowninFig.79.
Note:
• Lower Post may need to be unmounted to install bracket
then remounted.