Installation Guide

Fe
26
TRADITIONAL INSTALLATION
5
*Installed panel heights include a 3-3/4”[95mm]spacebetweendecksurface
andboomedgeofboomrail.
*Postswithpre-aachedUB-04BracketsareavailablefortradionalpanelONLYinstallaons.
*Installed panel height of 42”[1067mm]includes a 2”[51mm]spacebetweendecksurfaceand
boomedgeofboomrails and is ONLYavailableforpostswithpre-aachedUB-04Brackets.
Universal Bracket (UB-04)PostConguraon
Fe
26
Tradional
Panel Height
Rail Panel
Installed Panel Height* RequiredPost
UNIVERSAL BRACKET (UB-04):POST MOUNTING
*IfusingFortressEvoluonFraming,referenceEvoluonPosttoFrame
conneconinstruconsinthelinkbelow:
hps://fortressbp.com/Documents/Framing-Installaon-Guide.pdf
Note:
It’s recommended to install brackets onto post before
Post Mounng. Reference page 7 for Bracket Installaon
steps.
Fe
26
Posts with pre-aached UB-04 Brackets are available.
Reference page 8.
Step 1: Install Wood Blocks
 1. InstallWoodBlocklevelwithtopofjoist.Asshownin
  Fig.1.
 2. SecureWoodBlocktoblockingonallfoursideswith
  #10X3-1/2”[89mm]deckscrews.
 • WoodBlockmustbeconstructedwithtreateddimensional
 lumberwithaminimumthicknessof1-1/2”[38mm].
34”[864mm] 37-3/4”[959mm] 39-1/2”[1003mm]
38”[965mm]
41-3/4”[1061mm]
45-1/2”[1156mm]
40”[1016mm]
43-3/4”[1111mm]
45-1/2”[1156mm]
40”[1016mm]
42”[1067mm]
45-1/2”[1156mm]