Installation Guide

Fe
26
TRADITIONAL INSTALLATION
7
Fig. 4 Fig. 5
OTP and Proud Post: Max Post Spacing
• 8’ panel maximum post spacing is 93-7/8”. • 6’ panel maximum post spacing is 69-7/8”. Note: Do not exceed the maximum post spacing.
8’ Panel max post spacing 93-7/8” 6’ Panel max post spacing 69-7/8”
OTP and Proud Post: Measuring The Panel Opening Length
• Measure the distance of the panel opening. • Measure from the back wall of the bracket to the back wall of the bracket on other post. • Confirm that the measurements for the top brackets are the same as the bottom brackets.
Measure the panel opening
Not here
Measure from
back of bracket
Check measurement with top
3/12
OTP and Proud Post: Max Post Spacing
• 8’ panel maximum post spacing is 93-7/8”. • 6’ panel maximum post spacing is 69-7/8”. Note: Do not exceed the maximum post spacing.
8’ Panel max post spacing 93-7/8” 6’ Panel max post spacing 69-7/8”
OTP and Proud Post: Measuring The Panel Opening Length
• Measure the distance of the panel opening. • Measure from the back wall of the bracket to the back wall of the bracket on other post. • Confirm that the measurements for the top brackets are the same as the bottom brackets.
Measure the panel opening
Not here
Measure from
back of bracket
Check measurement with top
3/12
Fig. 6
Fig. 7
Shimpostasneededto
ensure post is level
Deck Board
RimJoist
Joist / Blocking
Wood Block
1/2”
[13mm]
Step 5: Check Mounted Posts
 1. Shimpostasneededtoensurepostislevel.
Step 4: Mount Posts
 1. Markmounngholelocaonsandpre-drilla3/8”[10mm]
 hole.
 2. Insert3/8”x3-1/2”[10mmx89mm]HexHeadgalvanized
 boltsthrough3/8”[10mm]galvanizedwasherandpost
 baseplate.
Note:
• Post Base Plate holes MUSTbeposionedaminimum1/2”
 [13mm]fromedgeofdeckboard.