Installation Guide

65 87
1
2
3 4
Quick Installation Guide
Security Tips
2
1
4
NVR Structure
Device Connection
Model: FN3108XE-B4-1T / FN3108XE-B8-2T
V1.2.3
EQ310816
Package Contents
5
Technical Support 6
3
Installing the Cameras
Step One - Connect Monitor
Step Two - Connect your cameras
Please Note:
Ensure that the rain or water will not reach the connector ports at the
end of the pig tail wiring. These connectors are not weather-resistant.
B: Connect the NVR to a Monitor or TV
Use the VGA cable that came with your monitor to connect it to
the NVR’s VGA port.
There is a one-to-one relationship between the IP Camera Input
port and the video channel of your NVR.
Step Three - Connect to your network
Step Four - Connect the mouse
Step Five - Connect the power adapter
Please connect your NVR to the router using Ethernet cable.
Please make sure your router is connected to the internet.
The USB mouse supplied with your NVR can be connected to
either of the two rear USB ports.
Connect the power adapter to the power input port.
The connections are now complete. You can turn on the
power to enter your NVR’s interface.
VGA Output : Connect to your TV or computer monitor via VGA port.
Ethernet Port: 10 / 100Mb. You can connect your NVR to the internet via
Ethernet cable.
IP Cameras Input: These ports are for both power and video and are
where you plug in your camera cables.
Power Switch: Power on / o button.
Reset: Press and hold the "Reset" button for a few seconds while the NVR
is powered on, and then release.
The NVR will automatically reboot and restore factory settings. The
username and password will be set to the default value, which are
“admin/(blank)” respectively.
HD-OUT: Connect to your HDTV or computer monitor with HD-OUT port.
USB: For connecting your USB mouse to control the NVR.
Power Input: This is where you connect the NVR’s DC power supply.
0~90°
0~360°
0~360°
0~90°
0~360°
0~360°
A: Connect the NVR to your HDTV
Plug one end in to the HD-OUT socket on the rear of the NVR
and the other in to a spare HD-OUT port on your TV.
Note:
If you have already connected your NVR using HD-OUT you don’t need
to do it again using the VGA port.
HD-OUT Cable
NVR
Mouse
NVR
Power Adapter
NVR
8 Channel NVR Hard Drive (FN3108XE)
720P Bullet IP Cameras (FI9800XE) Screw Pack
25m (82 ft) Ethernet Cable HD Cable
15m (49 ft) Ethernet Cable USB Mouse
1.5m (5 ft) Ethernet Cable Power Adapter for NVR
Quick Installation Guide Quick Operation Guide
Warranty Card CD
If you have problems with your Foscam device, please contact the
reseller you purchased from, or you can e-mail the Foscam headquarter
Technical Support team: [e-mail]
www.foscam.com
Your valuable comments and suggestions on improving Foscam
products are welcomed!
CE Certificate Website:
http://www.foscam.com/company/ce-certificate.html
Router
NVR
Ethernet Cable
IP Camera
(FI9800XE)
NVR
Ethernet Cable
}
Note:
Please power on independently when the IPC is not FI9800XE,
because FN3108XE does not support the standard PoE function.
Reset
VGA Output
Power InputHD-OUT USB
Power Switch
Ethernet Port IP Cameras Input
NVR
VGA Cable (not supplied)
Place the cameras in your preferred locations and use the included
screws to mount them.
Please change the password of your Foscam NVR App account,
and NVR and cameras username regularly. The password should
contain a combination of numbers, letters and special characters.
Please keep the username and password of your cameras, NVR
and Foscam NVR App account safe.
Please update your camera to the latest rmware regularly for an
optimal user experience.
Maybe you need more cameras to cover larger space, or you need to
replace the old failed camera looking ahead into the future. Foscam is
here to meet your home or business security needs! Please visit our
ocial mall website http://www.foscammall.com (Select IP Camera >
Bullet Camera).
For detailed manuals, tools, etc., please visit
http://www.foscam.com > Support > Download Center.