Installation Guide

PRODUCT DESCRIPTION
BENEFITS/FEATURES
RECOMMENDED APPLICATIONS
TECHNICAL INFORMATION
SPECIFICATIONS/COMPLIANCES
APPROXIMATE COVERAGE RATES
SHELF LIFE
PACKAGING
ARMOR SC25
LONG LASTING PENETRATING SEALER & WATER REPELLENT
ARMOR SC25
WATER REPELLENTS
ARMOR SC25™ is a reactive, penetrating catalyzed siliconate solution that fuses within porous substrates of concrete, brick, stone,
and mortar to form an invisible, hydrophobic barrier within the pores that can last for up to 10 years. Surfaces sealed with the Armor
SC25 are more resistant to freeze-thaw damage, scaling and spalling, staining, and the growth of mold, mildew, and algea. ARMOR
SC25™ is breathable with minimal impact to traction coefficient. ARMOR SC25™ creates a cross-linked insoluble methyl-silicone
internal membrane that will wear away only if the substrate itself wears away below sealer penetration.
♦ Reduces the damaging effects of water absorption such as cracking, spalling, pitting, freeze thaw damage, and staining.
♦ Minimizes damage due to water and salt water from de-icing road salts and salt water pool systems.
♦ Will reduce the growth of mold, mildew, and algae on the surface, and make the surface easier to clean.
♦ Will not change the color of the concrete, will not leave behind a slippery surface film or coating.
ARMOR SC25 is recommended for interior and exterior, driveways and sidewalks, parking lots, pool decks, patios, brick, pavers, smooth toweled con-
crete, broom finish concrete, aggregate concrete, stone, and other unsealed, porous substrates.
Solids……………………………….……………...…proprietary
Drying Time………………………………………....1 - 2 hours
Re-Coat Time…………...………………...refer to instructions
Foot Traffic.............................................................4-6 hours
Wheel Traffic......................................................24-48 hours
Application Temp................................................50°F - 85°F
***Please note that low air and/or concrete temperatures and/or relative humidity may extend drying times. Follow recommended coverage rates for best results.
Can be applied to new or existing surfaces. For fresh poured concrete apply ARMOR SC25 after all bleed water is gone, fin-
ishing is done and can be walked on without marking.
ARMOR SC25 has a shelf life of up to one year in it’s original, sealed, unopened container.
ARMOR SC25 is packaged in 1 gallon cans, 5 gallon pails, and 55 gallon drums.
Porous Concrete & Masonry 100-150 ft
2
Dense, Trowel Finished Concrete 200-250 ft
2
*Coverage rates vary depending upon surface porosity and texture, and application method. Excessive build up should be avoided.
Wet Appearance.................................................................Clear
Dry Appearance...........................................Clear and No Gloss
VOC Content.....................................................................<0 g/l
Blush Resistance...............................................................Good
Alkalinity Resistance.....................................................Excellent
Concrete Adhesion.......................................................Excellent
PRODUCT CODE: SC25
FOUNDATION ARMOR
3 BUD WAY STE 27, NASHUA, NH 03063
Phone: [phone]
Visit us online at: www.FoundationArmor.com