Use and Care Manual

PRODUCT DESCRIPTION
BENEFITS/FEATURES
SUGGESTED APPLICATIONS
TECHNICAL INFORMATION
COVERAGE
SHELF LIFE
PACKAGING
The Armor SC25 is a high solids, water based Siliconate water repellent sealer that penetrates deep into the concrete surface where it chemi-
cally reacts to form a hydrophobic barrier within the pores. Surfaces sealed with the Armor SC25 are more resistant to the damaging effects of
water absorption, such as cracking, spalling, pitting, freeze thaw and salt damage, staining, mold and mildew, and efflorescence. It can be ap-
plied to interior and exterior, vertical and horizontal surfaces.
Solids………………………………………………+/- 20%
Drying Time……………………………………….1-2 hours
Re-Coat Time…………...…………………………2-24 hours
Foot Traffic..............................................................12-24 hours
Wheel Traffic...........................................................24 - 48 hours
Application Temp....................................................45°F - 85°F
When properly sealed and stored, the shelf life of the Armor SC25 is up to 1 year.
The Armor SC25 is available in a 16 OZ Sample, 1 Gallon Bottle, 5 Gallon Pail, and 55 Gallon Drum.
Porous Substrates 125-175 ft²/gallon in one coat.
Dense, Trowel Finished Substrates 250-350 ft²/gallon in one coat.
The average coverage rate is 175 FT2/gallon in one coat. Coverage rates will vary depending upon surface porosity and texture, and applica-
tion method. Excessive build up should be avoided.
Wet Appearance.......................................Clear
Dry Appearance........................................Invisible
VOC Content............................................<0 g/l
Blush Resistance.......................................Good
Alkalinity Resistance................................Excellent
Concrete Adhesion....................................Excellent
Armor SC25 Siliconate
Water Repellent Sealer
Foundation Armor
472 Amherst Street #14
Nashua, NH 03063
[phone]
FoundationArmor.com
 Will maintain the natural, unsealed look and feel of the substrate
 Will provide up to 10 years of life before the need for a recoat
 Breathable, low VOC.
 Will reduce deterioration caused by water absorption such as
cracking, spalling, pitting, staining
 Will reduce the formation of mold and mildew
 Will reduce freeze-thaw and salt damage
 Will reduce the movement of moisture through the concrete pores
 Cost effective—requires only 1 heavy coat
 Poured, broom finished, and troweled concrete.  Driveways, walkways, and stairs.
 Pool decks and patios.
 Garage, warehouse, and basement floors and walls.
 Car ports, pole barns, retail and restaurant floors.
COMPLIANCES
Can be applied to new concrete after all bleed water is gone, and surface can be walked on without marking.