Use and Care Manual

PRODUCT DESCRIPTION
BENEFITS/FEATURES
SUGGESTED APPLICATIONS
TECHNICAL INFORMATION
COVERAGE
SHELF LIFE
PACKAGING
The Armor SX5000 WB is a high solids, water based Silane-Siloxane water repellent sealer that penetrates deep into the concrete surface
where it chemically reacts to form a hydrophobic barrier within the pores. Surfaces sealed with the Armor SX5000 WB are more resistant to
the damaging effects of water absorption, such as cracking, spalling, pitting, freeze thaw and salt damage, staining, mold and mildew, and
efflorescence. It can be applied to interior and exterior, vertical and horizontal surfaces.
Solids………………………………………………+/- 20%
Drying Time……………………………………….1-2 hours
Re-Coat Time…………...…………………………Wet on Wet
Foot Traffic..............................................................12-24 hours
Wheel Traffic...........................................................24 - 48 hours
Application Temp....................................................45°F - 85°F
When properly sealed and stored, the shelf life of the Armor SX5000 WB is up to 1 year.
The Armor SX5000 WB is available in a 16 OZ Sample, 1 Gallon Bottle, 5 Gallon Pail, and 55 Gallon Drum.
Porous Substrates 125-175 ft²/gallon in one coat.
Dense, Trowel Finished Substrates 250-350 ft²/gallon in one coat.
The average coverage rate is 250 FT2/gallon in one coat. Coverage rates will vary depending upon surface porosity and texture, and applica-
tion method. Excessive build up should be avoided.
Wet Appearance.......................................Clear
Dry Appearance........................................Invisible
VOC Content............................................Low VOC
Blush Resistance.......................................Excellent
Alkalinity Resistance................................Excellent
Concrete Adhesion....................................Excellent
Armor SX5000 WB Approved Silane Siloxane
Water Repellent Sealer
Foundation Armor
472 Amherst Street #14
Nashua, NH 03063
[phone]
FoundationArmor.com
 Contains up to 5X more active ingredients than similar products
 Will maintain the natural, unsealed look and feel of the substrate
 Will provide up to 10 years of life before the need for a recoat
 Breathable, low odor.
 Will reduce deterioration caused by water absorption such as
cracking, spalling, pitting, staining
 Will reduce the formation of mold and mildew
 Will reduce freeze-thaw and salt damage
 Will reduce the movement of moisture through the concrete pores
 Is approved by the Department of Transportation as a water repel-
lent sealer in several states
 Poured, broom finished, and troweled concrete.
 Pavers and brick.
 Aggregate and natural stone.
 Driveways, walkways, and stairs.
 Pool decks and patios.
 Garage, warehouse, and basement floors and walls.
 Car ports, pole barns, retail and restaurant floors.
COMPLIANCES
 NCHRP 244 Report, Series II:
 Reduction in Water Absorption: +/- 81-95%
 Reduction in chloride ion content: +/- 84%
 Reduction in water vapor transmission: +/- 100%
 Dried coating is USDA accepted