- Foundry Router User Guide

OSPF Configure Commands

configure router ospf interface

This command configures an interface for OSPF routing.

Parameter Description

syntax:

[ no ] interface < name > [ dlci < n > ] [ < area _id > ]

NOTE: When the “ospf” interface is created for the first time, area id must be specified. Thereafter, it is optional.

example:

Foundry-AR1208/configure/router/ospf# interface Toronto 5

related commands:

applicable systems:

All models.

name Enter an interface name, such as ethernet0, ethernet1, or a bundle

name.

dlci Data link connection identifier of the pvc (for frame relay use).

The range is 16 - 1022; there is no default.

area_id OSPF area ID

Enter either a decimal number or an IP address.

configure router ospf 1583Compatibility

configure router ospf area

configure router ospf distance

configure router ospf interface authentication

configure router ospf interface cost

configure router ospf interface dead_interval

configure router ospf interface hello_interval

configure router ospf interface neighbor

configure router ospf interface network

configure router ospf interface poll_interval

configure router ospf interface priority

configure router ospf redistribute

configure router ospf ref_bw

configure router ospf interface retransmit_interval

configure router ospf timers

configure router ospf interface transmit_delay