- Foundry Router User Guide

Foundry AR-Series Router User Guide

Step 8: Configure IPSec tunnel to the remote host:

NOTE: For IPSec only – when you create an outbound tunnel, an inbound tunnel is automatically created. The

inbound tunnel applies the name that you provide for the outbound tunnel and adds the prefix “IN” to the name.

Step 9: Display the IPSec policies:

Router1/configure/crypto# ipsec policy Router2 172.16.0.2

Router1/configure/crypto/ipsec/policy Router2 172.16.0.2# match

address 10.0.1.0 24 10.0.2.0 24

Default proposal created with priority1-esp-3des-sha1-tunnel and

activated.

Router1/configure/crypto/ipsec/policy Router2 172.16.0.2# proposal 1

Router1/configure/crypto/ipsec/policy Router2 172.16.0.2/proposal 1#

encryption-algorithm des-cbc

Router1/configure/crypto/ipsec/policy Router2 172.16.0.2/proposal 1#

exit

Router1/configure/crypto/ipsec/policy Router2 172.16.0.2# proposal 2

Proposal added with priority2-esp-3des-sha1-tunnel.

Router1/configure/crypto/ipsec/policy Router2 172.16.0.2/proposal 2#

encryption-algorithm aes256-cbc

Router1/configure/crypto/ipsec/policy Router2 172.16.0.2/proposal 2#

exit

Router1/configure/crypto/ipsec/policy Router2 172.16.0.2# exit

Router1/configure/crypto# exit

Router1/configure#

Router1# show crypto ipsec policy all

Policy Peer Match Proto Transform

------ ---- ----- ----- ---------

Router2 172.16.0.2 S 10.0.1.0/24/any Any P1 esp-des-

sha1-tunl