- Foundry Router User Guide

Generic Routing Commands
June 2004 © 2004 Foundry Networks, Inc. 6 - 3
show ip routes
This command displays IP routing information for Ethernet ports.
Parameter Description
syntax:
show ip routes [ network < IP address > ] [ mask < netmask > ] [ protocol < all | bgp | connected | ospf | rip | static
> ] [ database < rib | fib > ]
The following table provides parameter definitions for the following screen display examples.
By default, information is displayed for all routes in the routing table. To display only specific route information,
specify the appropriate protocol or the network mask.
network Network IP address
Enter an IP address.
mask Network mask
Enter a netmask address
protocol
all All protocols
bgp Border Gateway protocol (BGP)
connected Connected routes
ospf Open Shortest Path First protocol (OSPF)
rip Routing Information Protocol (RIP)
static Static routes
database
rib RIB routes
fib FIB routes
Table 6.1: Parameter Definitions
term definition
Network Indicates the address of the remote network.
Next Hop Specifies the address of the next router to the remote network
Interface Specifies the interface through which the specified network can be
reached.
PVC > Virtual (logical) circuit identification number.
Distance The administrative distance for the route.
Metric The metric for the route.