Installation Guide

PATIO COVER INSTRUCTION SHEETS
[e-mail]
PATIO COVER INSTRUCTION SHEETS
[e-mail]
LifeRoom Optima Installation Guide
STEP 4E: Person #1 tells person #2 to raise or lower the 3x3 Edge Beam to get it
level. When it is level, person #2 will mark along the bottom of the Beam onto the
Post. Cut the post under the line marked. Repeat STEP 3-D to fasten the Post (#J) to
the Edge Beam (#F).
STEP 4D: Measuring, Leveling, Cutting, Fastening 3 x 3 Posts (#J) Radius
Corners to Edge Beam (#F) (continued) Place a ladder at the first End Post for
Person #1. Place second ladder near the opposite end for person #2 as shown. Stand
up the attached Post and Front Edge Beam assembly while person #2 is holding the
Front Edge Beam LEVEL and also holding a POST against the Edge Beam.